Pro Tools/ iTunes/ QuickTime 7 bug, workaround

page previous  1, 2, 3, 4, 5  next
You are here:  SillyDog701 > Message Centre > Mac OS and Apple > [sdt=8928]
SillyDog701 Forums
Author Message
timtoady
junior member


Joined: 30 May 2005
Posts: 5
13 Jun, 2005 6:38 pm [sdp=58905]  

timtoady wrote:
Wow, thanks again for the very helpful advice. I have been dreading this situation- not being able to upgrade my OS for fear of breaking PT 10.3.4, and now it's finally become an official PITA.

But the last thing you said is something I hadn't even considered: Maintaining two startup disks, one with 10.3.8 just for pro tools, and one with Tiger, for everything else. I just happen to have an extra hard drive I can use for this.

Unless anyone here knows a good reason why it's >not< such a good idea to maintain such a system, (I can't think of one right away,) I will probably go with that. Thanks again.

Todd


I went ahead and did this- I installed panther 10.3 on a second hd (10.3.8 update won't work, so it appears to be stuck at 10.3) and upgraded my non-PT system to tiger.

Unfortunately, the itunes errors still came up! So I backed up the whole thing, and reinstalled tiger with a hard drive wipe, just to make sure. I backed up my entier ~/Library/ and copied it into place in my home dir in the new install, which has worked in the past for restoring all my preferences.

However.... I somehow retained the problem, as I STILL get the same errors in iTunes! I went through ~/Library/Preferences/, ~/Library/Application Support/, etc, wiping out anything that could be causing the problem, short of the actual com.apple.iTunes.plist file (which would lose track of my music library as well...) -- I should note that I even tried deleting that file once, just to test, and sure enough, the error >still< occured!

So now I'm at a loss-- I trashed all the iTunes prefs, quicktime prefs, and I still can't find the culprit of the errors. And this is with no digidesign software whatsoever.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/412 (KHTML, like Gecko) Safari/412
Back to top profile
Jezza
new member


Joined: 17 Jun 2005
Posts: 2
17 Jun, 2005 5:39 am iTunes error message re movie data [sdp=59119]  

I am having the same problem as timToady. viz
The problem is that, at sporadic intervals, iTunes gives an error message: "Searching for movie data in file "iTunes Preset 20041#43856F.aiff" with a "Stop" button.

If I wait a few seconds, that dialog disapears (!) and a second error message comes up: 'The movie file "iTunes Preset 20041#43856F.aiff" cannot be found. Without this file, the movie cannot play properly.' with a 'cancel' and a 'Search' button.

Each time I try to import a CD I get the same above messages which have to be manually cancelled to import each track... uuh... slightly laborious.

I'm running MacOSX 10.3.9 and QT7.0.1 and iTunes 4.8

Can't see any soutions to timtoady's post. C'mon you boffins... let's have ya!

UserAgent: Mozilla/4.0 (compatible; MSIE 5.17; Mac_PowerPC)
Back to top profile
timtoady
junior member


Joined: 30 May 2005
Posts: 5
18 Jun, 2005 5:50 pm Solution found! [sdp=59195]  

Jezza, I am happy to report that after weeks of searching, I found a solution that completely fixed this problem. It turns out it's an iTunes issue, related to Apple's attempt to start integrating music videos into iTunes. (oy)

On the following page, look for the posts near the bottom by user "Lob" and you will find your solution. Hooray!

http://macusersforum.com/lofiversion/index.php?t6007.html

Note that I had to actually delete the offending files (vs. converting them to mp3's) because the error messages became so frequent I couldn't do anything but hit the delete key before the next message woudl come up. But I just backed up the files before deleting them and reimported them. Problem solved.

Todd

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/412 (KHTML, like Gecko) Safari/412
Back to top profile
Jezza
new member


Joined: 17 Jun 2005
Posts: 2
22 Jun, 2005 4:07 am iTunes / movie data malarchy [sdp=59334]  

Thanks to timtoady and Lob for stirling efforts on iTunes problem. Mine seems fixed. Jezza

UserAgent: Mozilla/4.0 (compatible; MSIE 5.17; Mac_PowerPC)
Back to top profile
Antony
Site Admin


Joined: 18 Jun 2002
Posts: 12754
Location: Sydney, Australia
22 Jul, 2005 10:36 pm [sdp=60865]  

While I was in Apple Discussions, someone pointed out this thread:
The DUMBEST Quicktime Core Audio issue EVER!! (from Digidesign)

Evandude wrote:
Ok, I know I had another string going but this is now alittle different. I'm using Tiger 10.4.2 Quicktime 7.0.1 and a 002 Rack at 6.9.2. all on a new dual G5 2.3ghz. Here is the issue.
In Safari or even if I'm just running audio through Quicktime, I can play a movie or a quicktime audio file fine, for the first time. My 002's firewire blinks and out comes the music, cool! However, after I close the current file and try to load another one, it'll load but 3 seconds into playing it freezes!!! Confused So then I quit out of quicktime, relaunch it again, and play the file and it works fine. BUT OH NO! If I stop that one and load another it freezes again. This is so stupid!! It's like quicktime needs to reset it's buffer or cache or whatever the hell it is, that or Core Audio isn't playing nice with quicktime. There should be such a simple fix to this. DEAR DIGI, if you know or anyone else knows what is doing this, please please tell me. I don't want to downgrade back to Quickime 6.5.2 shouldn't have too. Thanks

and Digidesign's support replied
DigiTechSupt wrote:
There are currently issues with Quicktime 7 and the Digidesign Core Audio driver. We are working on a fix for this as soon as possible and will post information here on the DUC when an update is available.


UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.7.8) Gecko/20050427 Camino/0.8.4

Back to top profile website
camerio
new member

Andre Bisson
Joined: 16 Aug 2005
Posts: 2
16 Aug, 2005 6:47 pm Itunes will not install [sdp=62226]  

I have been following this post because it discribes the trouble I have been with.
the only thing that do not work anymore is that I cannot install itunes at all...
I had cleaned up the drawer applications on my disk of everything related to itunes and thought I could re-install from my ilife 04 disk... it does intall everything else included but not itunes
I have uploaded itunes 4.7.1 from apple site, after I select the destination disk, a window appears telling me that the installation requires 0 kb and the differents packages are all deactivated. I cannot select and activate.
I work on a 1.25 double cpu G4 tower
I also have an M-Box and I did every suggestion relating to that in that post
Quicktime is working but no itunes
I do not have a back up of my appliquations except for the disk that came when I installed ilife
sorry for the long post, I am new at this and feel quite alone in my corner of the globe
camerio

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; fr-fr) AppleWebKit/312.1.1 (KHTML, like Gecko) Safari/312
Back to top profile
camerio
new member

Andre Bisson
Joined: 16 Aug 2005
Posts: 2
17 Aug, 2005 11:58 am follow up on my problem... [sdp=62251]  

I found that by trowing away the receips left on the disk system by itunes then I could re-install
I thought I would let everyone know that itunes is now working again after 3 days of trials
Thanks and keep up the thread
I found the solution on Apple discussions...itunes installations and upgrade.

camerio

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; fr-fr) AppleWebKit/312.1.1 (KHTML, like Gecko) Safari/312
Back to top profile
BadKat
new member

Kathryn
Joined: 04 Nov 2005
Posts: 1
04 Nov, 2005 10:25 pm Pro tools on OS X 10.3.9 [sdp=65835]  

I just bought the Mbox2 which comes with Pro Tools 6.8.1. For some reason PT won't install (says 1009:5,-36 IO Error (Bad Disk)). I tried a totally different installer disk at the store (took G4 Power Mac in) and nothing would work. Same error everytime. Anyone have any ideas? It's making me crazy!!
Thanks
Kathryn

UserAgent: Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)

badkat
Back to top profile
pepedgn
new member

Pepe Dougan
Joined: 22 Nov 2005
Posts: 1
22 Nov, 2005 11:55 am Digi 001 [sdp=66564]  

Hi Eriel!

I´m very excited about finding someone talking clearly about 001 and Digidesign. It´s three years i have it and I´m very satisfied with it too.
Eriel, i´m working as well with no troubles with Core Audio 6.9, but with 10.3.7. Now i have Logic Express and Soundtrack Pro and they ask me to upgrade to 10.3.9. I read that you don´t have any problem working with 001 and Logic Express on 10.3.9. Can i do it as well?
And another very insteresting thing is what u said about booting Tiger from another hard drive, and leaving the audio for Panther. Have u tried it?

My system: Dual G4 867 Mhz, 1.25 Gb

Thanks

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/125.5.5 (KHTML, like Gecko) Safari/125.12
Back to top profile
EddiePaxil
super member


Joined: 21 Apr 2005
Posts: 170
13 Dec, 2005 3:58 pm Re: Pro tools on OS X 10.3.9 [sdp=67404]  

BadKat wrote:
I just bought the Mbox2 which comes with Pro Tools 6.8.1. For some reason PT won't install (says 1009:5,-36 IO Error (Bad Disk)). I tried a totally different installer disk at the store (took G4 Power Mac in) and nothing would work. Same error everytime. Anyone have any ideas? It's making me crazy!!
Thanks
Kathryn


Hope you got this resolved the only help I can offer is going to Digidesign.com's answerbase and typing in the name of the error it will give you a description of what it means.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/125.5.6 (KHTML, like Gecko) Safari/125.12

"Once the music leaves your head it's already compromised." - Thurston Moore of Sonic Youth
Back to top profile
EddiePaxil
super member


Joined: 21 Apr 2005
Posts: 170
13 Dec, 2005 4:01 pm Re: Digi 001 [sdp=67405]  

pepedgn wrote:
Hi Eriel!

I´m very excited about finding someone talking clearly about 001 and Digidesign. It´s three years i have it and I´m very satisfied with it too.
Eriel, i´m working as well with no troubles with Core Audio 6.9, but with 10.3.7. Now i have Logic Express and Soundtrack Pro and they ask me to upgrade to 10.3.9. I read that you don´t have any problem working with 001 and Logic Express on 10.3.9. Can i do it as well?
And another very insteresting thing is what u said about booting Tiger from another hard drive, and leaving the audio for Panther. Have u tried it?

My system: Dual G4 867 Mhz, 1.25 Gb

Thanks


Just don't install Quicktime 7. As far as I know there is still no resolution for those using PT 6.4 or the 001. I was working well in 10.3.9 till I installed QT 7. I am currently hanging tough in 10.3.8. I will be installing a new Hard Drive in the next two months then I will experiment with it once along with the QT 7 upgrade patches to see if there has been any change. But as of now I won't reccomend getting QT 7 to Digi 001 PT 6.4 users.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/125.5.6 (KHTML, like Gecko) Safari/125.12

"Once the music leaves your head it's already compromised." - Thurston Moore of Sonic Youth
Back to top profile
maritamixa
new member

marita fitzgerald
Joined: 19 Jan 2006
Posts: 1
Location: melbourne
19 Jan, 2006 6:16 pm quicktime and itunes again! [sdp=69078]  

hey all,

I too installed quicktime 7 and had fun with it messing up my digidesign software and itunes. I downloaded the quicktime 6.5.2 re installer and it only partially removed quicktime 7! now i have no functional quicktime and i cannot install quicktime 6.5.2 as the installer says i still have another version on my mac yet the re installer for 6.5.2 gives me the message that i don't have quicktime 7 so i cannot re install 6.5.2.... how confusing

please help!!!! Confused

UserAgent: Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
Back to top profile
EddiePaxil
super member


Joined: 21 Apr 2005
Posts: 170
29 Jan, 2006 12:30 pm Re: quicktime and itunes again! [sdp=69605]  

maritamixa wrote:
hey all,

I too installed quicktime 7 and had fun with it messing up my digidesign software and itunes. I downloaded the quicktime 6.5.2 re installer and it only partially removed quicktime 7! now i have no functional quicktime and i cannot install quicktime 6.5.2 as the installer says i still have another version on my mac yet the re installer for 6.5.2 gives me the message that i don't have quicktime 7 so i cannot re install 6.5.2.... how confusing

please help!!!! Confused


The Re-Installer doesn't fix the issues in 10.3.9 or Pro Tools left by QT7 if you have a Digi 001. See first thread entry. You must re-install. If you have one of the mBox's or Digi 002's or better then get Pro Tools 6.9. and the latest Core Audio 6.9.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/125.5.6 (KHTML, like Gecko) Safari/125.12

"Once the music leaves your head it's already compromised." - Thurston Moore of Sonic Youth

Last edited by EddiePaxil on 29 Jan, 2006 12:40 pm; edited 2 times in total
Back to top profile
EddiePaxil
super member


Joined: 21 Apr 2005
Posts: 170
30 Jan, 2006 2:27 pm The most complete information I have on this bug: [sdp=69656]  

Here's the most complete information I have on this issue from various sources. Covering the most recent Digidesign hardware/ software releases, for LE, beginning with the Audio Media III card. The Mbox 2 is not covered here, as the included software should not have this conflict.

Digidesign itself says (paraphrasing) anyone with MBox, Digi 002R, or 002 still running Panther can run it on 10.3.9 adding QuickTime 7 with Pro Tools LE 6.9 and Core Audio 6.9. Or upgrade to OSX Tiger 10.4.x (10.4.4 still not supported as of January 30th '06) and run Pro Tools LE 6.9 or 7.0 with Core Audio 7.0. These are the minimum Digidesign requirements on these platforms, to the best of my knowledge, even as far as "street" testing goes.

Digidesign says (paraphrasing) anyone with the Audio Media III/Toolbox (interchangeable) can only go as high and be "officially supported" as Pro Tools LE 6.1.2 on OSX Jaguar 10.2.6 or 10.2.8. While Pro Tools LE 6.2.3 for Panther has the Audio Media III drivers included it was never “officially” tested. They do concede independent testing has shown the configuration can work, however, they do not guarantee performance. Pro Tools LE 6.2.3 for “supported” hardware is only “officially” supported up to OSX 10.3.2.

"Street" testing has yielded that the Audio Media III card can be used with Pro Tools LE 6.2.3 on a platform as high as OSX Panther 10.3.9 as long as you do not (I repeat do not) install QuickTime 7ever. The QuickTime 6.5.2 re-installer will not remove problems created by installing QuickTime 7. You can even update the Digidesign Core Audio Drivers.


Digidesign says (again easier to paraphrase) that the Digi 001 is only "officially supported" as high as Pro Tools LE 6.4cs9 on OSX Panther 10.3.2 or 10.3.4 and was not fully tested on OSX 10.3.3.

"Street" testing has yielded that the Digi 001 can run on OSX Panther 10.3.9 with Pro Tools LE 6.4cs9 as long as you do not (I repeat do not) install QuickTime 7ever. The QuickTime 6.5.2 re-installer will not remove problems created by installing QuickTime 7 You can even update the Digidesign Core Audio Drivers.

Further "street" testing shows that Installing Digidesign’s Core Audio 7.0 on OSX Tiger 10.4.x (That's right Tiger. Again 10.4.4 not supported as of January 30th) will allow you to use the Digit 001 on Tiger, but not with any version of Pro Tools. (I repeat NOT with any version of Pro Tools.) You would need Tiger Compatible Pro Audio software i.e. Logic, Ableton, Cubase, Nuendo, or Digital Performer. The Digidesign Audio Media III card will not run on tiger at all as it’s drivers were not included in the Core Audio driver.

Basically if you are running what Digidesign refers to as “Legacy” hardware. Audio Media III/ Toolbox or the Digi 001. You are running a version of Pro Tools LE that is incompatible with QuickTime 7. If at any point QuickTime 7 is installed you must re-install to delete its effects, and are stalled on OSX 10.3.9 (w/o QuickTime 7). If you are running hardware that is still supported (i.e. Mbox, Digi 002, and Digi 002R) you will need to upgrade to a version of Pro Tools LE & Core Audio compatible with QuickTime 7. For Example, Pro Tools LE 6.9 on Panther or Tiger and Pro Tools LE 7.0 on Tiger.

Hope this is helpful. Hope this clarifies some questions. If I get any new info I will post. As soon as I install my new Hard Drive I’m going to have a chance to do some extended testing of my own, and I’ll let you know what I find.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/125.5.6 (KHTML, like Gecko) Safari/125.12

"Once the music leaves your head it's already compromised." - Thurston Moore of Sonic Youth
Back to top profile
EddiePaxil
super member


Joined: 21 Apr 2005
Posts: 170
31 Jan, 2006 5:47 pm New Rule! [sdp=69719]  

As my favorite comedian Bill Maher does on his HBO show.

New Rule.

If you are running Pro Tools LE with the Digi 001 or Audio Media III card on OSX 10.3.9, don't do anything involving Quicktime that didn't run on OSX 10.3.8 or earlier. I just installed OSX 10.3.9 and was running nicely when I got the idea to try the Flip 4 Mac WMV plug-in for Quicktime. Major conflicts. Major. Stay away from it.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/312.8 (KHTML, like Gecko) Safari/312.5

"Once the music leaves your head it's already compromised." - Thurston Moore of Sonic Youth
Back to top profile
Display posts from previous:   
Reply to topic    Forum Index > Mac OS and Apple All times are CST (GMT -6)
page 2 of 5 page previous  1, 2, 3, 4, 5  next
To add your questions, comments, and for more features and more, please join SillyDog701 Message Centre. It's free! This is SillyDog 701 Message Centre (SD701 Forums).

Samantha Who iTunes

*Search | FAQ | Rules and Policies | MozInfo701 - Mozilla Information Centre | SD701 Open Directory | Message Board Map | download Netscape