SillyDog701 Message Centre

[EddiePaxil]

[Antony]

Thanks for keeping us updated, Eriel.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/417.9 (KHTML, like Gecko) Safari/417.8

---

MozInfo701 | MacCentre701 | AntBlog701 | don't steal music.

[dougefresh256]

Hello out there!

I finally decided to update my iTunes to 6.0.3 on my Mac G4 733Mhz that is also running Pro Tools 6.4 with a Digi 001. I was running OS 10.3.8 and my new version of iTunes worked fine. It told me update to Quicktime 7. So I updated my OS from 10.3.8 to 10.3.9 then installed Quicktime 7 and all hell broke loose.

Thanks for all the info here. It took me a while to realize that my Pro Tools had something to do with it.

After I installed Quicktime 7, my iTunes doesn't open at all and neither does Quicktime. In my dock, both programs say "application not responding".

I've tried the the Quicktime 6.5.2 reinstall and it says "You cannot install the software on this volume. This disk is dimmed because it does not contain an appropriate version of Quicktime"

Can anyone help me figure out how to get Quicktime 7 uninstalled? Arghh!!

Will trashing the reciepts make any difference?

Do I have to totally reinstall my OS?

I was also getting the problem with the Disk Utility and verifying Disk Permissions.

All I want to do is play my music on iTunes!!

Thanks for your help...

Doug

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.7.8) Gecko/20050511 Firefox/1.0.4

[Antony]

[dougefresh256]

Antony,
Thanks for you help.

The good news is that I did the reinstall from 7.0.4 to 7.0.1, then reinstalled from 7.0.1 to 6.5.2. That worked! My Quicktime is now working!

My iTunes 6.0.3 is still not working ('application not responding' still shows in the dock when it tries to open).

I tried moving iTunes to the desktop, running Disk Utility - verifying disk permissions and repairing disk permissions, and erasing the Library/Receipt files (except iTunesX.pkg and iTunesPhoneDriver.pkg). iTunes still doesn't respond.

Maybe something I need to do with my Core Audio Driver from Digidesign?

Thanks again, I appreciate your help.

Doug

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.7.8) Gecko/20050511 Firefox/1.0.4

[dougefresh256]

I finally got my iTunes working again by installing the CoreAudio Driver 6.9

If anyone else has problems, I found some good info on this thread:

http://duc.digidesign.com/showthreaded.php?Cat=&Number=824809&page=0&view=&sb=5&o=

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.7.8) Gecko/20050511 Firefox/1.0.4

[EddiePaxil]

[dougefresh256]

Ah ha!
It all makes sense now...
I didn't make the connection.
Luckily it was a pretty harmless solution so far. Haven't run into any problems.
Again, many thanks!

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.7.8) Gecko/20050511 Firefox/1.0.4

[professortiki]

While I was able to run Cubase SX 1.0.5 with Digi001 on OS 10.3.9 with no problems at all, I noticed I could not log films from my camcorder with Final Cut or iTunes until I disabled the Digi001 in the sound control panel. It took me a while to detect that, because I didn't draw that unobvious connection. Why would the picture disappear because of a sound hardware device? Now, since I already downgraded my Quicktime to 6.5.2, with the unpleasant side-effect that I cannot watch a lot of formats anymore, would it really make sense to downgrade my entire system to 10.3.4 again? I mean, it's quite an effort and I ask myself, if it will solve my issue with iMovie and Final Cut at all. Any opinion appreciated. Thanks for reading.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; de-de) AppleWebKit/417.9 (KHTML, like Gecko) Safari/417.9.2

---

Apple Macintosh G4 "Sawtooth" • PowerLogix 1.4 GHz • Digi001 • OSX 10.3.9 • Cubase SX 1.0.5 • Final Cut 4.5

[EddiePaxil]

[professortiki]

Thanks for your thoughts. However I already used CoreAudio 6.9 and I have been trying to dump all kinds of prefs incl. those of FinalCut. Meanwhile I managed to find a workaround for the problem: Before grabbing videos from the camera I switch off the Digidesign Output in the Sound Control panel. It works. Still I think it's kind of funny, that a soundcard output setting would cause an error in the video input display.

[EddiePaxil]

[professortiki]

[hardasmum]

I had the same trouble as everyone else here today. I installed Quicktime 7.0.4 before reading your posts and it completely did a number on my G4. (OSX 10.3.9/Digi 001/Pro Tools 6.4) I found this easy solution using third party software called Pacifist. http://www.charlessoft.com/

I followed these instructions. Well, not exactly, I didn't bother re-installing prior versions of QT7, I just went right to 6.5.2

http://fox-gieg.com/tutorials/2005/undo-quicktime-7/

It worked a charm! Everything is back to normal! Unless ofcourse you know something about Pacifist that I don't! Please let me know.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/312.1 (KHTML, like Gecko) Safari/312

[mpnow]

I have just bought an MBOX 2, which comes with PT LE 6.8.1 and PT LE 7.

I have just installed it on a G5 Powermac, dual 2ghz, running on Panther 10.3.9 - onto the main Macintosh hardrive, rather than the 2nd hard drive or the Lacie external.

When it was installing, it came up with a couple of error messages, which I just ignored, and carried on with the installation. (funny that these blips do not appear in the log)

Now, when I try to launch PT I get the following message "Error #-5000 while verifying your authorization UNKNOWN ERROR". This happens 4 times during the laucnh, at exactly the same points every time
1) Loading Plug ins Broadband Noise Reduction LE
2) Loading Plug Ins VocALignLEX
3) Loading plug ins DAE Loaded and
4) Launching Pro Tools Creating DAE and Midi Command.

I checked this forum. I have QT Pro 7.1.3 installed.
So I downloaded the Core Audio Setup 6.9 from digidesign. However, since I did that, a new thing occurs.

I still get all the same error messages when Pro Tools is loading. But now, near the end of the process, the PT loading window states that it is setting up Midi. It seems to take a long time. You expect to see the indicator bar gradually fill with blue to the end (as normally happens with everything else). However it does not. It stops just ver half way. Nothing happens for about 30 seconds, the the PT loading window disappears and PT appears to be open.

I would be grateful for any suggestions.

UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en) AppleWebKit/312.8 (KHTML, like Gecko) Safari/312.6